Dc fix LIGHT SLATE Peel and Stick Vinyl Floor Tiles 30.48cm x 30.48cm

Description

dc fix LIGHT SLATE peel and stick vinyl floor tiles 30.48cm x 30.48cm

This is a budget friendly solution for covering floors in your home.  The flooring is easy to install with just a utility knife.  The peel and stick function means less mess and no dust is created when laying this floor.  The vinyl tiles have a waterproof surface, so suitable for low wet areas like a bathroom, but not suitable for wet rooms or in the shower.  Ideal for rented, these tiles are removable when it’s time to leave!

Application

• Avoid uneven surfaces e.g. floor boards, floating floors, concrete, lino, carpet or radiant heated floors
• We recommend levelling the floor prior to installation to achieve an optimal finish
• Hardboard can be laid if floor is not completely flat
• Allow 48 hours to acclimate to room temperature of at least 18C
• Ensure floor is thoroughly cleaned and free from dust and grit
• Extra adhesive can be used to help the tiles adhere if needed e.g. Bostik or similar
• Score tile with a utility knife and snap back
• Check reverse of the tile for any pattern matches (if any), lay in the direction of the arrows shown
• Rotate the tile when laying to make sure it’s the right way around. You might find a slight variation in design match from tile to tile. The variation should not affect the overall look of your flooring
• Visit our HELP section for frequently asked questions and how to videos

Aftercare

• Wipe clean using regular household cleaner, use vacuums and mops as normal, 5 days after application
• Remove tiles by lifting the corner and peeling back, use heat from a hairdryer to help soften the adhesive
• These tiles are not slip resistant, place a mat down for any wet areas like a bathroom